功能簡介

簡介

  • 完全整合 – 5機一體
  • 支援完整 USB Type-C Power Delivery 3.0 and 2.0 認證測試
  • 兩個獨立TypeC 測試port – Source/Sink 最高達200瓦
  • 支援DisplayPort and Thunderbolt 3 Alt Modes電性自動化測試
  • 整合Qualcomm Quick Charge 4+ and Thunderbolt 3-特殊測試項目

概述

    GRL-USB-PD-C2 (GRL-C2)是唯一同時支援USB Power Delivery 3.0 and USB Type-C Alternate Mode 的認證測試設備, 開發人員只需簡單的按幾個按鍵就可以快速完整的測試驗證你的產品.

    GRL-C2提供自動,高效率且完全自動化整合的方式,藉由USB Type-C介面進行所有USB Power Delivery 3.0和2.0以及相關的測試項目,以及USB Type-C Alt-Mode的PHY自動化測試。 GRL-C2可自動測試power providers (充電器), consumers, dual-role ports, cable 以及 adapter E-Markers所有USB PD相容性測試;並且是唯一可用於Qualcomm Quick Charge 4+和Intel Thunderbolt特定測試項目的解決方案。 GRL-C2還結合了分析器功能錄製PD所有溝通內容。 GRL-C2將所有必需的USB PD測試整合到一個測試設備中。

主要功能

  • Supports all required USB Power Delivery version 3.0 and 2.0 and related tests over the USB Type-C connector in one platform
  • Integrated PHY Test Controller for DisplayPort, Thunderbolt 3, and HDMI Alternate Mode testing
  • Integrated AUX Controller for DisplayPort Source and Sink Physical Layer Testing supporting multiple oscilloscope and BERT platforms
  • USB PD protocol analyzer/sniffer mode, configurable between integrated UFP/DFP controller to DUT or as a ‘pass through’ using extension adapter
  • Supports all USB PD devices including cable and adapter E-Markers, power providers (chargers), power consumers, and dual-role devices
  • Supports DisplayPort Alt Mode CTS Chapter 10 PD Protocol tests
  • Provides two independent PD test ports with 240W Provider and 200W Consumer emulation
  • Integrates Qualcomm Quick Charge 4+ and Intel Thunderbolt-specific tests
  • Supports BMC-PHY-TX with any Windows7+ oscilloscope from Keysight, Tektronix, Rohde & Schwarz, or Teledyne LeCroy
  • Runs all other USB PD tests internally, greatly reducing test times
  • Access to CC1, CC2, Vbus signals for waveform capture via front panel extension adapter
  • All waveforms saved for further analysis and debug
  • Automatically generates comprehensive .pdf, .csv, and .xml test reports