軟體與配件

  • GRL-USB-PD-C2-QC – Upgrade GRL-USB-PD-C2 to Qualcomm QuickCharge 4+ (SW Upgrade)
  • USB Cable – Standard Type A to Type B Programming cable used to update GRL-USB-PD-C2 firmware. Connects to GRL-USB-PD-C2 upgrade USB port.
  • Ethernet Cable – 3m Cat 5 cable to connect GRL-USBPD-C2 test controller to control computer.
  • GRL-USB-PD-STC – GRL Special (GRL-SPL) Type-C VCONN Passthrough test cable, used for connecting UUT to GRL-USB-PD-C2 test controller. This is a full feature cable with all Type-C lines connected in between both ends of the cable.
  • Accessory Pouch

GRL-USB-PD-DPC – GRL DPC PHY Tx Automation Test Board, which comprises the following:

GRL-C2-EXT1 DisplayPort Fixture, LFPS & FRSWAP Control Board

    – EXT1 extension fixture for GRL-USB-PD-C2 test controller, used to:

  • Control signals for GRL-C2-FRSWAP AUTO Box Board.
  • Test DisplayPort Alt Mode over Type-C.
  • Control Low Frequency Periodic Signaling (LFPS) sequences in USB 3.0 system.
  • Support for DP PHY automation using GRL-USB-PD-C2 test controller.

GRL-USB-PD-FRS – GRL Fast Role Swap (FRSWAP) Board (Coming Soon), which comprises the following:

  • GRL-C2-FRSWAP AUTO Box Board – Fixture for GRL-USBPD-C2 test controller, used to automate Fast Role Swap based testing. Connects to DUT to remove External AC power from DUT.
    Note: The fixture will be shipped inside an enclosure.
  • GRL-C2-EXT5 Extension Board – EXT5 extension fixture for GRL-USB-PD-C2 test controller, used to:
    • Control inputs/outputs from C2.
    • Provide signal triggering for FRSWAP and other peripherals.

GRL-USB-PD-FCB – GRL Type-C Functional Compliance Board (Coming Soon), which comprises the following:

  • GRL-HS-EXT Fixture – Extension fixture for GRL-USB-PD-C2 test controller, used to control VBUS and CC lines between connected devices without interfering the high speed lines between Type-C input/output connectors.
  • Support for functional compliance testing using GRL-USB-PD-C2 test controller.

GRL-USB-PD-TBT – GRL Thunderbolt Power Board (Coming Soon), which comprises the following:

  • GRL-C2-EXT5 Extension Board – EXT5 extension fixture for GRL-USB-PD-C2 test controller, used to:
    • Control inputs/outputs from C2.
    • Provide signal triggering for FRSWAP and other peripherals.
  • GRL-USB-PD-SHT – Extension fixture for GRL-USB-PD-C2 test controller, used to connect to Port 1 and Port 2 of GRL-USB-PDC2 test controller to perform external short circuit for VBUS and VCONN to ground using control signals from GRL-C2-EXT5 extension board.
  • Support for Thunderbolt testing using GRL-USB-PD-C2 test controller.

GRL-USB-PD-STC – GRL Special (GRL-SPL) Type-C VCONN Passthrough test cable, used for connecting UUT to GRL-USB-PD-C2 test controller. This is a full feature cable with all Type-C lines connected in between both ends of the cable.