功能簡介

簡介

  • 主要OEM品牌用於工廠產線測試用
  • 100% 支援工廠產線測試功能
  • 可由工程師自行開發與定義USB Power Delivery測試項目

 

概述

    GRL-USB-PD-C2 適用於PD 和QC產品開發過程中標準認證測試,GRL-USB-PD-F1以實惠的價格成為工廠和品牌廠用於工廠的產測或抽測。 GRL-USB-PD-F1可用於測試USB Type-C和Type-A接口的各種產品,包括移動電話,PC,底座,顯示器,基於USB的移動電源,牆壁和車載充電器,以及汽車信息娛樂系統支持不同的充電技術,包括USB PD 2.0,帶PD的USB PD 3.0,高通QC 2.0,QC 3.0,QC4,QC4 +。 GRL-USB-PD-F1測試儀將USB Type-C PD的所有必需測試集成到單個2端口測試設備中,具有240W電源和兩個120W負載。每個端口可以獨立配置為PD Provider或PD consumer。

    GRL-USB-PD軟體通過網路線連接外部的PC上運行。該解決方案使產品開發人員可快速執行全功能和功耗測試。 用戶可以執行內建功能測試,檢查協議,功率負載,空載/滿載情況下的電壓影響,電壓過衝/下衝,紋波,過流,短路和VI功效測試* 。用戶還可以使用GRL-USB-PD-F1模擬市場上的不同產品驗證他們的產品相容性。用戶還可以利用豐富的API程式庫,使用Python或C#對GRL-USB-PD-F1進行程控,以創建自定義測試項目或驗證相容性問題。GRL-USB-PD-F1在測試儀中獨一無二且高度整合,功能強大且易於使用,價格合理。

主要功能

Key features:

  • Integrates 5 Instruments into a single compact tester
  • Portable enough to be placed on any lab bench or office desk
  • Complete all testing within 30 seconds in a single setup
  • Easy to use software allows you to select test coverage and test reports
  • Detail protocol and power test logs and traces captured for every test run
  • Test data can be stored locally on PC or accessed through the cloud
  • Perfect for testing mobile phones, PC’s, docks, monitors, USB based power banks, wall and car chargers, and car infotainment systems
  • Functionally exercises power capabilities over multiple voltage rails
  • Two fully independent ports – source/sink up to 240W
  • Support of multiple charging technologies like USB Power Delivery, USB Battery Charging 1.2, Qualcomm Quick Charge, etc.
  • Tests for proper USB Power Delivery negotiation, power loading, voltage impact of no-load/full-load situations, voltage overshoot/undershoot, ripple, over-current, short circuit, and Level VI power efficiency testing*
  • Programmable API access allows users full control of protocol negotiation and power behavior through Python or C# scripts
  • Emulation of USB protocol and power behavior of different devices in the market
  • Power loading profiles captured by the GRL-USB-PD–A1 can be replicated and played back
  • Supports DP Tx electrical test automation as DP Aux accessory
  • Bench and rack-mount versions available

*Separate power meter accessory needed for power efficiency testing