PCI Express®3.0 Base 接收端自動化測試軟體Tektronix BERTScope™ (GRL-PCIE3-BASE-RX)
概述
-
GRL的PCI Express®3.0 Base Specification接收端自動化測試軟體用於Tektronix BERTScope™ BSA/BSX (GRL-PCIE3-BASE-RX)提供自動簡單且有效率的測試方案,依據PCIe 3.0 Base (ASIC) Specification.
GRL-PCIE3-BASE-RX整合BERTScope和Tek示波器,自動校準眼圖並測試Rx規範和抖動容限。採用PCI-SIG標準測試方法,GRLPCIE3-BASE-RX使用Seasim統計數據眼圖模擬器建立DDJ和最終校準的眼圖。GRL-PCIE3-BASE-RX提供簡單的使用者介面,可自動執行複雜的PCIe測試,顯著縮短設備校準時間,並可在任何基於Windows 7或Windows 8 OS的PC或示波器上執行。
主要功能
- Automate PCIe3.0 Rx Base Spec Compliance using Tektronix test equipment
- Perform Receiver Jitter Tolerance testing at the push of a button
- Reduce technical risk using an industry-accepted calibration methodology
- Achieve consistent results with rapid test execution
應用規範
- Data Rates: 8 GT/s; 5 GT/s (PCIe 2.0) planned for future release
- Supported Receiver Test: Common Clock Architecture
- This application is compatible with:
- Tektronix BERTScopeTM BSA, 8Gb/s or above
- Tektronix Real-Time Oscilloscope (DPO/MSO70000DX) 16 GHz or above
- Tektronix DPOJET (Jitter and Eye Analysis) Software
- Tektronix CR125A Clock Recovery Unit
- Tektronix DPP125C Digital Pre-Emphasis Processor
- Tektronix AFG3252C Arbitrary Function Generator
- Tektronix Combiner
- BNC to SMA adapter
- ISI Channel (Variable or Fixed):
- Variable – ACE Unitek CLE1000-A2
- Fixed – BERTScopeTM ISI Boards
- Additional accessories - refer to product datasheet
GRL-PCIE3-BASE-RX - PCI Express® 3.0 Base Specification Receiver Test Automation Software.
Prices are subject to change without notice.
Contact GRL
to request a demo of GRL's PCI Express®3.0 Base Specification Receiver Test Automation Software (GRL-PCIE3-BASE-RX).